Source]:sweep:step:stop:frequency:step – RIGOL DSG3000 Series User Manual

Page 115

RIGOL

DSG3000 Programming Guide

2-95

[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP

Syntax

[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP?

Description

Set the stop frequency step of the sweep.
Query the stop frequency step of the sweep.

Parameter

Name

Type

Range

Default

Real

10mHz to 1GHz

100MHz

Explanation

 When is set in "Number" form, the default unit is Hz. Besides,

can also be set in "Number + Unit" form, for example, 3kHz.

 The default unit of the return value is Hz.

 After setting the stop frequency step, you can use the up/down direction keys

or knob to modify the stop frequency at the current step. At this point, you can

query or set the stop frequency using the

command.

Return Format

The query returns the stop frequency step of the sweep, for example, 3000.

Example

:SWE:STEP:STOP:FREQ:STEP 3kHz
:SWE:STEP:STOP:FREQ:STEP?

Related

Command

[:SOURce]:SWEep:STEP:STOP:FREQuency