Source]:sweep:step:start:level:step, Source]:sweep:step:stop:frequency – RIGOL DSG3000 Series User Manual

Page 114

RIGOL

Chapter 2

Command System

2-94

DSG3000 Programming Guide

[:SOURce]:SWEep:STEP:STARt:LEVel:STEP

Syntax

[:SOURce]:SWEep:STEP:STARt:LEVel:STEP
[:SOURce]:SWEep:STEP:STARt:LEVel:STEP?

Description

Set the start level step of the sweep.
Query the start level step of the sweep.

Parameter

Name

Type

Range

Default

Real

0.01dB to 100dB

1dB

Explanation

 When is set in "Number" form, the default unit is dB. Besides,

can also be set in "Number + Unit" form, for example, 20dB.

 The default unit of the return value is dB.

 After setting the start level step, you can use the up/down direction keys or

knob to modify the start level at the current step. At this point, you can query

or set the start level using the

[:SOURce]:SWEep:STEP:STARt:LEVel

command.

Return Format

The query returns the start level step of the sweep, for example, 20.00.

Example

:SWE:STEP:STAR:LEV:STEP 20
:SWE:STEP:STAR:LEV:STEP?

Related

Command

[:SOURce]:SWEep:STEP:STARt:LEVel

[:SOURce]:SWEep:STEP:STOP:FREQuency

Syntax

[:SOURce]:SWEep:STEP:STOP:FREQuency
[:SOURce]:SWEep:STEP:STOP:FREQuency?

Description

Set the stop frequency of the sweep.
Query the stop frequency of the sweep.

Parameter

Name

Type

Range

Default

Real

9kHz to 6GHz

2GHz

Explanation

 When is set in "Number" form, the default unit is Hz. Besides,

can also be set in "Number + Unit" form, for example, 4MHz.

 The default unit of the return value is Hz.

 After setting the stop frequency, you can use the up/down direction keys or

knob to modify the stop frequency at the current step. At this point, you can

query or set the current step using the

[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP