RIGOL DSG3000 Series - Manual (Page 142)

RIGOL Chapter 2 Command System
2-122 DSG3000 Programming Guide
:SYSTem:COMMunication:LAN:IP:ADDress
Syntax :SYSTem:COMMunication:LAN:IP:ADDress
:SYSTem:COMMunication:LAN:IP:ADDress?
Description Set the IP address.
Query the current IP address.
Parameter Name Type Range Default
ASCII
string
The format is nnn.nnn.nnn.nnn,
wherein, the range of the first nnn is
from 1 to 223 (except 127) and the
ranges of the other three nnn are
from 0 to 255
NULL
Explanation  This command is only valid when Manual-IP configuration mode is turned on.
 You are recommended to ask your network administrator for an address
available.
Return Format The query returns the IP address, for example, 172.16.3.199.
Example :SYST:COMM:LAN:IP:ADD 172.16.3.199
:SYST:COMM:LAN:IP:ADD?
Related
Command
:SYSTem:COMMunication:LAN:IP:MANual
:SYSTem:COMMunication:LAN:IP:AUTO
Syntax :SYSTem:COMMunication:LAN:IP:AUTO ON|OFF|1|0
:SYSTem:COMMunication:LAN:IP:AUTO?
Description Turn on or off the Auto-IP configuration mode.
Query the state of the Auto-IP configuration mode.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 ON
Explanation  In Auto-IP mode, the instrument acquires IP address within 169.254.0.1 and
169.254.255.254 and subnet mask 255.255.0.0 automatically based on the
current network configuration.
 When all the three IP configuration modes are "On", the priority of parameter
configuration is "DHCP", "Auto-IP" and "Manual-IP".
 The three IP configuration modes can not be all set to "Off" at the same time.
Return Format The query returns 1 or 0.
Example :SYST:COMM:LAN:IP:AUTO ON
:SYST:COMM:LAN:IP:AUTO?
Related
Commands
:SYSTem:COMMunication:LAN:DHCP
:SYSTem:COMMunication:LAN:IP:MANual