RIGOL DSG3000 Series - Manual (Page 17)

Chapter 1 Programming Overview RIGOL
DSG3000 Programming Guide 1-3
Remote Control Methods
1. User-defined programming
You can program and control DSG3000 using the SCPI (Standard Commands for Programmable
Instruments) commands listed in chapter 2 Command System in various development environments
(such as Visual C++, Visual Basic and LabVIEW). For details, refer to the introductions in chapter 4
Programming Demos .
2. Send SCPI commands via PC software
You can use the PC software Ultra Sigma (from RIGOL) to send SCPI commands to control DSG3000
remotely.