RIGOL DSG3000 Series - Manual (Page 49)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-29
[:SOURce]:INPut:TRIGger:SLOPe
Syntax [:SOURce]:INPut:TRIGger:SLOPe POSitive|NEGative
[:SOURce]:INPut:TRIGger:SLOPe?
Description Set the polarity of the external trigger signal.
Query the polarity of the external trigger signal.
Parameter Name Type Range Default
POSitive|NEGative Discrete POSitive|NEGative POSitive
Explanation  This command is valid only when the trigger mode of SWEEP or "Swp-Sine" of
LF output is "Ext".
 The external trigger signal is input from the [TRIGGER IN] connector at the
rear panel.
Return Format The query returns POS or NEG.
Example :INP:TRIG:SLOP POS
:INP:TRIG:SLOP?