Application examples, Chapter 3 application examples, Chapter 3 – RIGOL DSG3000 Series User Manual

Page 153: Application examples -1

RIGOL

DSG3000 Programming Guide

3-1

Chapter 3 Application Examples

This chapter provides some application examples of the SCPI commands. A series of SCPI commands are

combined to realize the main functions of the RF signal generator.

Note:

1. The examples in this chapter are based on DSG3060. For other models, the ranges of some

parameters might be different. When using the commands, please make proper adjustment according

to the model of your instrument.

2. Before using the examples in this chapter, please select the desired communication interface (USB,

LAN, or GPIB) and make correct connections (refer to the introductions in

). Besides, you have to install Ultra Sigma or other PC software for sending commands

on your PC.

3. The content enclosed in "/*" and "*/" after each command is annotation for easier understanding and

is not a part of the command.

Main topics of this chapter:

 To Output RF signal