RIGOL DSG3000 Series - Manual (Page 38)

RIGOL Chapter 2 Command System
2-18 DSG3000 Programming Guide
[:SOURce]:AM:SOURce
Syntax [:SOURce]:AM:SOURce EXTernal|INTernal|INTernal,EXTernal
[:SOURce]:AM:SOURce?
Description Select the AM modulation source.
Query the AM modulation source.
Parameter Name Type Range Default
EXTernal|INTernal|
INTernal,EXTernal
Discrete EXTernal|INTernal|INTernal,EXTernal INTernal
Explanation  EXTernal: select "Ext" modulation source. At this point, the external
modulating signal is input from the [EXT MOD INPUT] connector.
 INTernal: select "Int" modulation source. At this point, the instrument provides
the modulating signal and you can set the modulation frequency and
modulation waveform of the modulating signal. In addition, when the AM and
MOD switches are both enabled, you can set the amplitude of the modulating
signal via the [:SOURce]:LFOutput:LEVel command.
 INTernal,EXTernal: select the "Int + Ext" modulation source. At this point, you
can operate both the internal and external modulating sources. For example,
perform dual-tone AM signal modulation.
Return Format The query returns the type of the AM modulation source. For example, EXT.
Example :AM:SOUR EXT
:AM:SOUR?
Related
Commands
[:SOURce]:AM:FREQuency
[:SOURce]:AM:WAVEform
[:SOURce]:LFOutput:LEVel
[:SOURce]:AM:STATe
Syntax [:SOURce]:AM:STATe ON|OFF|1|0
[:SOURce]:AM:STATe?
Description Set the AM switch state.
Query the AM switch state.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 OFF
Explanation  ON: turn on the AM switch and enable the AM function.
 OFF: turn off the AM switch and disable the AM function.
Return Format Return 1 or 0.
Example :AM:STAT ON /*Turn on the AM switch*/
:AM:STAT? /*The query returns 1*/