RIGOL DSG3000 Series - Manual (Page 110)

RIGOL Chapter 2 Command System
2-90 DSG3000 Programming Guide
[:SOURce]:SWEep:STEP:POINts
Syntax [:SOURce]:SWEep:STEP:POINts
[:SOURce]:SWEep:STEP:POINts?
Description Set the number of points of step sweep.
Query the number of points of step sweep.
Parameter Name Type Range Default
Integer 2 to 65535 11
Explanation  The number of sweep points decides the time interval between two
neighbouring sweep points.
 After setting the number of sweep points, you can use the up/down direction
keys or knob to modify the number of sweep points at the current step. At this
point, you can query or set the current step using the
[:SOURce]:SWEep:STEP:POINts:STEP command.
Return Format The query returns the number of sweep points, for example, 5.
Example :SWEep:STEP:POINts 5
:SWEep:STEP:POINts?
Related
Command
[:SOURce]:SWEep:STEP:POINts:STEP
[:SOURce]:SWEep:STEP:POINts:STEP
Syntax [:SOURce]:SWEep:STEP:POINts:STEP
[:SOURce]:SWEep:STEP:POINts:STEP?
Description Set the step of the number of sweep points.
Query the step of the number of sweep points.
Parameter Name Type Range Default
Integer 1 to 10000 1
Explanation After setting the step of the number of sweep points, you can use the up/down
direction keys or knob to modify the number of sweep points at the current step. At
this point, you can query or set the number of sweep points using the
[:SOURce]:SWEep:STEP:POINts command.
Return Format The query returns the step of the number of sweep points, for example, 2.
Example :SWE:STEP:POINt:STEP 2
:SWE:STEP:POINt:STEP?
Related
Command
[:SOURce]:SWEep:STEP:POINts