RIGOL DSG3000 Series - Manual (Page 53)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-33
[:SOURce]:IQ:MODe:STATe
Syntax [:SOURce]:IQ:MODe:STATe ON|OFF|1|0
[:SOURce]:IQ:MODe:STATe?
Description Set the IQ modulation switch state.
Query the IQ modulation switch state.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 OFF
Explanation  ON: enable the IQ modulation function.
 OFF: disable the IQ modulation function.
Return Format The query returns 1 or 0.
Example :IQ:MOD:STAT ON /*Enable the IQ modulation function*/
:IQ:MOD:STAT? /*The query returns 1*/
[:SOURce]:IQ:SAMPle
Syntax [:SOURce]:IQ:SAMPle
[:SOURce]:IQ:SAMPle?
Description Set the sampling rate of the IQ wave table output.
Query the sampling rate of the IQ wave table output.
Parameter Name Type Range Default
Real 1kHz to 100MHz 1MHz
Explanation  When is set in "Number" form, the default unit is Hz, for example,
3000. In addition, can also be set in "Number + Unit" form, for
example, 3kHz.
 The default unit of the return value is Hz.
 After the sampling rate is set, you can use the up/down direction keys or knob to
modify the sampling rate at the current step. You can query or set the current
step using the [:SOURce]:IQ:SAMPle:STEP command.
Return Format The query returns the sampling rate of the IQ wave table output, for example, 3000.
Example :IQ:SAMP 3kHz
:IQ:SAMP?
Related
Command
[:SOURce]:IQ:SAMPle:STEP