RIGOL DSG3000 Series - Manual (Page 77)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-57
[:SOURce]:LFOutput:SWEPtsine:TRIGger
Syntax [:SOURce]:LFOutput:SWEPtsine:TRIGger AUTO|KEY|BUS|EXT
[:SOURce]:LFOutput:SWEPtsine:TRIGger?
Description Set the trigger mode of sweep-sine.
Query the trigger mode of sweep-sine.
Parameter Name Type Range Default
AUTO|KEY|BUS|EXT Discrete AUTO|KEY|BUS|EXT AUTO
Explanation  AUTO: select "Auto" trigger mode. The RF signal generator fulfills the trigger
condition at any time and it will sweep according to the current setting once
"Swp-Sine" is selected.
 KEY: select "Key" trigger mode. If the sweep mode is set to "Cont", the
instrument performs a sweep each time Trigger at the front panel is pressed.
If the sweep mode is set to "Single", the instrument will perform a sweep and
then stop each time Trigger at the front panel is pressed after the
[:SOURce]:LFOutput:SWEPtsine:SINGle command is sent and when the single
sweep condition is met.
 BUS: select "Bus" trigger mode. If the sweep mode is set to "Cont", the
instrument performs a sweep each time the *TRG
or :TRIGger:LFOutput[:IMMediate] command is send. If the sweep mode is set
to "Single", the instrument performs a sweep and then stops each time the
*TRG command is sent after the [:SOURce]:LFOutput:SWEPtsine:SINGle
command is sent and when the single sweep condition is met.
 EXT: select "Ext" trigger mode. The RF signal generator accepts the trigger
signal input from the [TRIGGER IN] connector at the rear panel. If the sweep
mode is set to "Cont", the instrument performs a sweep each time a TTL pulse
signal with the specified polarity is received. If the sweep mode is set to
"Single", the instrument performs a sweep and then stops each time a TTL
pulse signal with the specified polarity is received after the
[:SOURce]:LFOutput:SWEPtsine:SINGle command is sent and when the single
sweep condition is met.
Return Format The query returns the trigger mode of sweep-sine, for example, KEY.
Example :LFO:SWEP:TRIG KEY
:LFO:SWEP:TRIG?
Related
Commands
[:SOURce]:LFOutput:SHAPe
[:SOURce]:LFOutput:SWEPtsine:SINGle
[:SOURce]:SWEep:MODE
*TRG
:TRIGger:LFOutput[:IMMediate]