RIGOL DSG3000 Series - Manual (Page 95)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-75
[:SOURce]:PULM:TRAin:LIST:INSErt
Syntax [:SOURce]:PULM:TRAin:LIST:INSErt ,,
Description Insert a row of pulse list data.
Parameter Name Type Range Default
Real 20ns to 170s-20ns 500us
Real 20ns to 170s-20ns 500us
Integer 1 to 256 1
Explanation  : set the duration of the positive pulse.
 : set the duration of the negative pulse.
 : set the repetition times of this pulse.
Example :PULM:TRA:LIST:INSE 5.5s,2.5s,2 /*Insert a row of pulse value before the row
currently selected: positive delay 5.5s,
negative delay 2.5s and repetition times
2*/
[:SOURce]:PULM:TRAin:LIST:RUN
Syntax [:SOURce]:PULM:TRAin:LIST:RUN
Description Execute the pulse list currently edited.
Explanation You can update the internal modulating signal as the current pulse list data using
this command.