RIGOL DSG3000 Series - Manual (Page 70)

RIGOL Chapter 2 Command System
2-50 DSG3000 Programming Guide
[:SOURce]:LFOutput:LEVel
Syntax [:SOURce]:LFOutput:LEVel
[:SOURce]:LFOutput:LEVel?
Description Set the amplitude of the LF output signal.
Query the amplitude of the LF output signal.
Parameter Name Type Range Default
Real 1mV to 3V 1V
Explanation
 When the AM or FM/øM function is enabled, the MOD switch is turned on and
internal modulation source is selected, you can use this command to set the
amplitude of the internal modulating signal.
 When is set in "Number" form, the default unit is V. Besides,
can also be set in "Number + Unit" form, for example, 2V.
 The default unit of the return value is V.
Return Format The query returns the amplitude of the LF output signal, for example, 2.00.
Example :LFO:LEV 2
:LFO:LEV?
[:SOURce]:LFOutput:SHAPe
Syntax [:SOURce]:LFOutput:SHAPe SINE|SWEPtsine|TRIangle|SQUare|RAMP
[:SOURce]:LFOutput:SHAPe?
Description Select the waveform of the LF output signal.
Query the waveform of the LF output signal.
Parameter Name Type Range Default
SINE|SWEPtsine|TRIangle|
SQUare|RAMP
Discrete
SINE|SWEPtsine|TRIangle|
SQUare|RAMP
SINE
Explanation  The parameter SINE|SWEPtsine|TRIangle|SQUare|RAMP can set the
waveform of the LF output signal to "Sine", "Swp-Sine", "Triangle", "Square" or
"Ramp".
 When the AM or FM/ØM function is enabled (the MOD switch is also turned
on) and internal modulation source is selected, you can set the waveform of
the LF output signal to sine or square using the [:SOURce]:AM:WAVEform ,
[:SOURce]:FM:WAVEform or [:SOURce]:PM:WAVEform command.
Return Format The query returns SINE|SWEP|TRI|SQU|RAMP.
Example :LFO:SHAP TRI
:LFO:SHAP?
Related
Commands
[:SOURce]:AM:WAVEform
[:SOURce]:FM:WAVEform
[:SOURce]:PM:WAVEform