Yaskawa iQpump Controller Programming Manual User Manual

Page 24

Text mode
Original mode

YASKAWA

TM.iQp.07 iQpump Controller Programming Manual

◆

b1-11 Drive Delay Time Setting

Setting Range:

0 ~ 600 s

Factory Default: 0 s

If a time is set into parameter b1-11, the iQpump drive will delay executing any run command until the b1-11 time has expired. During
iQpump drive delay time execution, the digital operator will display:

Both the ALARM and Run indicators will blink while the iQpump drive waits to execute the Run command.

DDLY

Waiting to RUN