Yaskawa iQpump Controller Programming Manual - Manual (Page 231)

YASKAWA TM.iQp.07 iQpump Controller Programming Manual 231
◆ P8-02 Water Level Scaling
Setting Range: 5 ~ 500 psi
Factory Default: 100
Refer to parameter P8-02 in Appendix A for description details.
◆ P8-03 Water Level Setpoint
Setting Range: 0.0 ~ 1200.0 ft
Factory Default: 20.0
Refer to parameter P8-03 in Appendix A for description details
◆ P8-04 Minimum Water Level
Setting Range: 0.0 ~ 1200.0 ft
Factory Default: 10.0
Refer to parameter P8-04 in Appendix A for description details.
◆ P8-05 Wake-Up Water Level
Setting Range: 0.0 ~ 1200.0 ft
Factory Default: 30.0
Refer to parameter P8-05 in Appendix A for description details.
◆ P8-06 Level Control Minimum Speed
Setting Range: 0.00 ~ 120.00 Hz
Factory Default: 0.00
Refer to parameter P8-06 in Appendix A for description details.
◆ P8-07 Low Level Detection Level
Setting Range: 0.0 ~ 1200.0 ft
Factory Default: 0.0
Refer to parameter P8-07 in Appendix A for description details.
HIFLO
High Flow
High flow has been detected by the flow
meter.
Too much flow or incorrect “P6” settings. —
Alarm Display Description Cause Countermeasures