Yaskawa iQpump Controller Programming Manual - Manual (Page 232)

232 YASKAWA TM.iQp.07 iQpump Controller Programming Manual
◆ P8-08 Low Level Detection Time Delay
Setting Range: 0.0 ~ 300.0 min
Factory Default: 0.1
Refer to parameter P8-08 in Appendix A for description details.
◆ P8-09 Low Level Behavior
Setting Range: 0 ~ 2
Factory Default: 1
Refer to parameter P8-09 in Appendix A for description details.
◆ P8-10 Level Control Proportional Gain
Setting Range: 0.00 ~ 25.00
Factory Default: 2.00
Refer to parameter P8-10 in Appendix A for description details.
◆ P8-11 Level Control Integral Time
Setting Range: 0.0 ~ 360 s
Factory Default: 5.00
Refer to parameter P8-11 in Appendix A for description details.