6 setting the host vlan, 1 show host vlan, Setting the host vlan -38 7.3.6.1 – Enterasys Networks 1G58x-09 User Manual
Page 380: Show host vlan -38, Section 7.3.6, 6 setting the host vlan purpose, Commands
VLAN Configuration Command Set
Setting the Host VLAN
7-38
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
7.3.6
Setting the Host VLAN
Purpose
To configure a host VLAN that only select devices are allowed to access. This secures the host port
for management-only tasks.
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
•
show host vlan (
•
set port vlan host (
)
•
)
7.3.6.1
show host vlan
Use this command to display the current host VLAN.
show host vlan
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
NOTE: The host port is the management entity of the device.