3 clear snmp access, 4 show snmp authenticationtrap, Clear snmp access -31 – Enterasys Networks 1G58x-09 User Manual
Page 253: Show snmp authenticationtrap -31, Section 5.2.3.3, Show snmp authenticationtrap, Section 5.2.3.4
SNMP Command Set
Configuring SNMP Access Rights
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
5-31
5.2.3.3
clear snmp access
Use this command to clear the SNMP access entry of a specific group, including its set SNMP
security-model, and level of security.
clear snmp access groupname security-model {v1 | v2 | v3 {noauth | auth |
authpriv}}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear SNMP version 3 access for the “mis-group”:
5.2.3.4
show snmp authenticationtrap
Use this command to display the status of the SNMP authentication trap function.
show snmp authenticationtrap
Syntax Description
None.
Command Defaults
None.
groupname
Specifies the name of the SNMP group for which to clear
access.
security-model v1 |
v2 | v3
Specifies the security model to be cleared for the SNMP
access group.
noauth | auth |
authpriv
Clears a specific security level for the SNMPv3 access
group.
Matrix>clear snmp access mis-group security-model v3 authpriv