Enterasys Networks 1G58x-09 - Manual (Page 741)

Security Configuration Command Set
Configuring MAC Locking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-59
14.3.4.15set maclock autostatic passthroughmac
Use this command to enable a received multicast destination MAC address to be scoped to VLAN
egress lists other than that of the VLAN of which it is a member.
set autostatic passthroughmac mac-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign MAC address 01:00:5e:00:00:05 as the autostatic MAC pass
through address:
NOTE: For this command to work properly, both the public ingress and egress VLANs
must be configured for autostatic MAC locking and described in
Section 14.3.4.13 , and
the pass through MAC address must be a multicast address. Improper use of this
command may result in connectivity issues.
mac-address Specifies a MAC address.
Matrix>set maclock autostatic psssthrough mac 01:00:5e:00:00:05