Enterasys Networks 1G58x-09 - Manual (Page 350)

VLAN Configuration Command Set
Reviewing Existing VLANs
7-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display VLAN information related to all Gigabit Ethernet ports. In this
case, all six ports ge.0.1-5 are still assigned to VLAN 1, the default VLAN. Ingress filtering has not
been enabled. Ports ge.0.1-5 are assigned to transmit untagged frames for the default VLAN only,
while, port ge.0.6 is also configured to transmit tagged frames for VLANs 510, 520, 530, 4000 and
4094:
Matrix>show vlan portinfo ge*.*
Port Ingress Egress
Vlan Filter Vlan
-----------------------------------------------------------------
ge.0.1 1 N untagged: 1
ge.0.2 1 N untagged: 1
ge.0.3 1 N untagged: 1
ge.0.4 1 N untagged: 1
ge.0.5 1 N untagged: 1
ge.0.6 1 N untagged: 1
tagged: 510,520,530,4000,4094