Enterasys Networks 1G58x-09 - Manual (Page 152)

Process Overview: Port Configuration
Port String Syntax Used in the CLI
4-6 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
4.2 PROCESS OVERVIEW: PORT CONFIGURATION
Use the following steps as a guide to configuring ports on the device:
1. Reviewing port status ( Section 4.3.1 )
2. Disabling / enabling ports ( Section 4.3.2 )
3. Setting speed and duplex mode ( Section 4.3.3 )
4. Enabling / disabling jumbo frame support ( Section 4.3.4 )
5. Setting auto negotiation and advertised ability ( Section 4.3.5 )
6. Setting flow control and thresholds ( Section 4.3.6 )
7. Setting port traps ( Section 4.3.7 )
8. Setting port mirroring ( Section 4.3.9 )
9. Configuring port trunking and link aggregation ( Section 4.3.10 )
10.Configuring port broadcast suppression ( Section 4.3.14 )
11.Configuring unknown destination address suppression ( Section 4.3.15 )