Enterasys Networks 1G58x-09 - Manual (Page 731)

Security Configuration Command Set
Configuring MAC Locking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-49
Syntax Description
Command Defaults
If port-string is not specified, MAC locking will be enabled on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable MAC locking on Fast Ethernet front panel port 3:
14.3.4.4 set maclock disable
Use this command to disable MAC locking on one or more ports.
set maclock disable [port-string]
Syntax Description
Command Defaults
If port-string is not specified, MAC locking will be disabled on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
port-string (Optional) Enables MAC locking on specific port(s). For
a detailed description of possible port-string values, refer
to
Section 4.1.2 .
Matrix>set maclock enable fe.0.3
port-string (Optional) Disables MAC locking on specific port(s). For
a detailed description of possible port-string values, refer
to
Section 4.1.2 .