Policy classification configuration, 1 policy classification configuration summary, Policy classification configuration summary -1 – Enterasys Networks 1G58x-09 User Manual
Page 393: Chapter 8
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
8-1
8
Policy Classification Configuration
This chapter describes the Policy Classification set of commands and how to use them.
8.1
POLICY CLASSIFICATION CONFIGURATION SUMMARY
Matrix E1 Series devices support policy profile-based provisioning of network resources by
allowing IT administrators to:
•
Create, change or remove user roles or profiles based on business-specific use of network
services.
•
Permit or deny access to specific services by creating and assigning classification rules which
map user profiles to frame filtering policies.
•
Assign or unassign ports to policy profiles so that only ports activated for a profile will be
allowed to transmit frames accordingly.
8.2
PROCESS OVERVIEW: POLICY CLASSIFICATION
CONFIGURATION
Use the following steps as a guide to configure policy classification on the device:
1. Configuring policy profiles (
)
2. Assigning classification rules to policy profiles (
3. Assigning ports to policy profiles (
)
NOTE: It is recommended that you use Enterasys Networks NetSight Atlas Policy
Manager as an alternative to CLI for configuring policy classification on Matrix E1 Series
devices.