Enterasys Networks 1G58x-09 User Manual
Page 53
Startup and General Configuration Summary
Factory Default Settings
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3-5
Spanning Tree
maximum aging time
Set to 20 seconds.
Spanning Tree path
cost
Set to 100 for Ethernet; 10 for Fast Ethernet; and 1 for Gigabit
Ethernet.
Spanning Tree
point-to-point
Set to auto for all Spanning Tree ports.
Spanning Tree port
priority
All ports with bridge priority are set to 128 (medium priority).
Spanning Tree priority
Bridge priority is set to 32768.
Spanning Tree real
time BPDU message
age mode
Disabled.
Spanning Tree
topology change trap
suppression
Enabled on edge ports.
Spanning Tree transmit
hold count
Set to 3.
Spanning Tree version
Set to mstp (Multiple Spanning Tree).
SSH (Secure Shell)
Enabled with the following settings: Listening port: 22. Rekey
interval: 3600 seconds. Login grace time: 60 seconds. Authentication
attempts allowed: 3. Nagle’s algorithm enabled.
System baud rate
Set to 9600 baud.
System contact
Set to a blank string.
System location
Set to a blank string.
System name
Set to a blank string.
Table 3-1
Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature
Default Setting