Enterasys Networks 1G58x-09 - Manual (Page 61)

Startup and General Configuration Summary
Process Overview: CLI Startup and General Configuration
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-13
3.1.5 Process Overview: CLI Startup and General Configuration
Use the following steps as a guide to the startup and general configuration process:
1. Starting and navigating the Command Line Interface (CLI) ( Section 3.1.6 )
2. Setting user accounts and passwords ( Section 3.2.1 )
3. Setting basic device properties ( Section 3.2.2 )
4. Downloading a new firmware image ( Section 3.2.3 )
5. Configuring Telnet ( Section 3.2.4 )
6. Managing switch configuration files ( Section 3.2.5 )
7. Configuring Enterasys and Cisco discovery protocols ( Section 3.2.6 )
8. Pausing, clearing and closing the CLI ( Section 3.2.7 )
9. Resetting the device ( Section 3.2.8 )
10.Preparing the device for router mode ( Section 3.3 )