Enterasys Networks 1G58x-09 - Manual (Page 111)

General Configuration Command Set
Managing Switch Configuration Files
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-63
Example
This example shows a portion of the output created by the summaryconfig command:
>show rad
RAD is currently enabled.
>
>show radius
RADIUS status: Disabled.
RADIUS retries: 3.
RADIUS timeout: 20 seconds
RADIUS Server Status Auth-Port
------------- ------ ---------
0.0.0.0 Primary 0
0.0.0.0 Secondary 0
RADIUS last-resort-action Status
------------------------- ------
Local Challenge
Remote Challenge
>
>show snmp
SNMP is currently enabled.
>
>show system
Power Supply Status
------------------------
PS1 - Operational
PS2 - Non-Operational
System Baud : 9600 System Timeout : 5 minutes.
System Lockout Time : 15 minutes.
System Uptime : 0 days, 23 hours, 26 minutes, 54 seconds
System Name System Location System Contact
------------------------ ------------------------ --------------
sysName sysLocation sysContact
>
>show telnet
Telnet is currently enabled.