3 set gvrp, Set gvrp -47, Section 7.3.8.3 – Enterasys Networks 1G58x-09 User Manual
Page 389: Set gvrp, Refer to
VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
7-47
7.3.8.3
set gvrp
Use this command to enable or disable GVRP globally on the device or on one or more ports.
set gvrp {disable | enable} [port-string]
Syntax Description
Command Defaults
If port-string is not specified, GVRP will be globally disabled or enabled.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to enable GVRP globally on the device:
This example shows how to disable GVRP:
This example shows how to enable GVRP on Fast Ethernet front panel port 1:
disable | enable Disables or enables GVRP on the device.
port-string
(Optional) Disables or enables GVRP on specific port(s). For
a detailed description of possible port-string values, refer to
Matrix>set gvrp enable
Matrix>set gvrp disable
Matrix>set gvrp enable fe.0.1