Enterasys Networks 1G58x-09 - Manual (Page 668)

Process Overview: Routing Protocol Configuration
Configuring IRDP
13-74 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
None.
Command Type
Router command.
Command Mode
Interface configuration: Matrix>Router(config-if(Vlan ))#
Command Defaults
None.
Example
This example shows how to enable the router to send IRDP advertisements using broadcast:
13.1.4.8 show ip irdp
Use this command to display IRDP information.
show ip irdp [vlan vlan_id]
Syntax Description
Command Type
Router command.
Command Mode
Interface configuration: Matrix>Router(config-if(Vlan ))#
Command Defaults
If vlan vlan_id is not specified, IRDP information for all interfaces will be
displayed.
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#no ip irdp multicast
vlan vlan_id (Optional) Displays IRDP information for a specific
VLAN. This VLAN must be configured for IP routing as
described in
Section 3.3.2 .