7 set trunk algorithm, Set trunk algorithm -57, Set trunk algorithm – Enterasys Networks 1G58x-09 User Manual
Page 203: Section 4.3.11.7
Port Configuration Command Set
Configuring Static Port Trunking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
4-57
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete Fast Ethernet front panel ports 5 through 7 from the “blue” trunk:
4.3.11.7 set trunk algorithm
Sets the algorithm that will be used to distribution MAC addresses across a trunk group as they are
learned on the device.
set trunk algorithm {machashing | roundrobin}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
trunk_name
Specifies the name of the trunk from which the port will
be removed.
port-string
Specifies the designation of the port to be removed from
the trunk. For a detailed description of possible
port-string values, refer to
.
Matrix>clear trunk port blue fe.0.5-7
machashing
Applies the MAC hashing algorithm.
roundrobin
Applies round robin distribution of MAC addresses.