Enterasys Networks 1G58x-09 - Manual (Page 398)

Policy Classification Configuration Command Set
Configuring Policy Profiles
8-6 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display invalid policy action information:
8.3.1.5 set policy invalid action
Use this command to assign the action the device will apply to an invalid or unknown policy.
set policy invalid action {default-policy | drop | forward}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix>show policy invalid action
Current action on invalid/unknown profile is: Apply default policy
Number of invalid/unknown profiles detected: 0
default-policy Instructs the device to ignore this result and search for the
next policy assignment rule.
drop Instructs the device to block traffic.
forward Instructs the device to forward traffic as if no policy has
been assigned.