16 clear spantree spanguard, 17 show spantree spanguardtimeout, Clear spantree spanguard -49 – Enterasys Networks 1G58x-09 User Manual
Page 335: Show spantree spanguardtimeout -49, Section 6.2.2.16, Section 6.2.2.17
Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6-49
Example
This example shows how to enable the span guard function:
6.2.2.16 clear spantree spanguard
Use this command to resets the status of the Spanning Tree span guard function to disabled.
clear spantree spanguard
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the status of the span guard function to disabled:
6.2.2.17 show spantree spanguardtimeout
Use this command to display the Spanning Tree span guard timeout setting.
show spantree spanguardtimeout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Matrix>set spantree spanguard enable
Matrix>clear spantree spanguard