Ip configuration, Chapter 12 – Enterasys Networks 1G58x-09 User Manual
Page 557
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
12-1
12
IP Configuration
This chapter describes the Internet Protocol (IP) configuration set of commands and how to use
them.
12.1 PROCESS OVERVIEW: INTERNET PROTOCOL (IP)
CONFIGURATION
Use the following steps as a guide to configuring IP on the device:
1. Configuring routing interface settings (
2. Reviewing and saving the routing configuration (
)
3. Reviewing and configuring the ARP table (
4. Reviewing and configuring broadcast settings (
)
5. Reviewing IP traffic and configuring routes (
)
ROUTER: The commands covered in this chapter can be executed when the device is
in router mode only. For details on how to enable router configuration modes, refer to
.