2 logging and network management command set, 1 configuring system logging, Configuring system logging -2 – Enterasys Networks 1G58x-09 User Manual
Page 472: Section 11.2.1, Commands
Logging and Network Management Command Set
Configuring System Logging
11-2
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2 LOGGING AND NETWORK MANAGEMENT COMMAND SET
11.2.1 Configuring System Logging
Purpose
To display and configure system logging, including Syslog server settings, logging severity levels
for various applications, and Syslog default settings.
Commands
Commands to configure system logging are listed below and described in the associated section as
shown.
•
set logging (
)
•
show logging all (
)
•
show logging console (
•
set logging console (
•
show logging server (
)
•
set logging server (
)
•
clear logging server (
•
show logging default (
•
set logging default (
)
•
clear logging default (
•
show logging application (
)
•
set logging application (
)
•
clear logging application (
•
show logging audit-trail (
•
copy audit-trail (
)