Enterasys Networks 1G58x-09 User Manual
Page 56
Startup and General Configuration Summary
Factory Default Settings
3-8
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
MD5 authentication
(OSPF)
Disabled with no password set.
MTU size
Set to 1500 bytes on all interfaces.
OSPF
Disabled.
OSPF cost
When OSPF is enabled, set to 10 for all OSPF interfaces.
OSPF network
None configured.
OSPF priority
Set to 1.
Passive interfaces
(RIP)
None configured.
Proxy ARP
Enabled on all interfaces.
Receive interfaces
(RIP)
Enabled on all interfaces.
Retransmit delay
(OSPF)
Set to 1 second.
Retransmit interval
(OSPF)
Set to 5 seconds.
RIP
Enabled.
RIP receive version
Set to accept both version 1 and version 2.
RIP send version
Set to version 1.
RIP timers
Update timer set to 30 (seconds); invalid timer set to 180; hold down
timer set to 120; flush timer set to 300.
RIP offset
No value applied.
Split horizon
Enabled for RIP packets without poison reverse.
Stub area (OSPF)
None configured.
Telnet
Enabled (inbound and outbound).
Table 3-2
Default Device Settings for Router Mode Operation (Continued)
Device Feature
Default Setting