Enterasys Networks 1G58x-09 User Manual
Page 729
Security Configuration Command Set
Configuring MAC Locking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14-47
Syntax Description
Command Defaults
If no parameters are specified, MAC locking information will be displayed for all
end stations.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display MAC locking information for all end stations known to the
device:
port-string
(Optional) Displays end station information for specified
port(s). For a detailed description of possible port-string
values, refer to
firstarrival |
firstarrival
port-string
(Optional) Displays MAC locking information about end
stations first connected to all MAC locked ports, or about
those first connected to specific port(s).
static | static
port-string
(Optional) Displays MAC locking information about
static (management defined) end stations connected to all
MAC locked ports, or about those connected to specific
port(s).
Matrix>show maclock stations
Number of stations found: 5
Port Number MAC address
Status State
------------ ----------------- --------------- --------------
fe.0.5 00-00-00-11-22-33
active
static
fe.0.8 00-20-78-06-0e-a0
active
first learned
fe.0.8 00-44-55-44-55-21
active
static
fe.0.8 00-a0-39-00-0c-7b
active
first learned
fe.0.22 11-22-33-44-55-66
active
static