4 configuring priority classification, Configuring priority classification -16, Ation – Enterasys Networks 1G58x-09 User Manual
Page 434: Section 9.3.4
Port Priority and Classification Configuration Commands
Configuring Priority Classification
9-16
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.4
Configuring Priority Classification
Purpose
To perform the following functions:
•
Display the current priority, classification, and description entries of each classification rule.
•
Assign priorities according to classification rules.
•
Add/delete a priority and associated protocol entry.
•
Enable or disable the priority tag override feature.
•
Assign an 8-bit Type of Service (TOS) value to incoming IP frames.
•
Overwrite an existing TOS value.
Commands
The commands used in configuring priority classification are listed below and described in the
associated section.
•
show priority classification (
)
•
set priority classification (
)
•
clear priority classification (
•
set priority classification ingress (
)
•
clear priority classification ingress (
•
set priority classification tosvalue (
•
clear priority classification tosvalue (
)
•
show priority classification qtagoverride (
)
•
set priority classification qtagoverride (