Enterasys Networks 1G58x-09 - Manual (Page 396)

Policy Classification Configuration Command Set
Configuring Policy Profiles
8-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
8.3.1.2 set policy profile
Use this command to create a policy profile entry.
set policy profile profile-index {[enable | disable] [name enable | disable vlan-id
enable | disable cos]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
profile-index Specifies an index number for the profile entry. Valid
values are 1 to 65535.
enable | disable Enables or disables the profile entry.
name Specifies a name for the entry.
enable | disable
vlan-id Enables or disables port VLAN ID (PVID) override for this
profile with the specified vlan-id. Valid values and their
corresponding actions are:
• 4095: classifies all traffic to an 802.1Q PVID and
permits it to forward. PVID must be assigned to this
policy profile with the set policy port command as
described in
Section 8.3.3.2 .
• 0: denies and discards all untagged traffic.
• 1: classifies all traffic to the default VLAN.
• 2 - 4094: classifies all traffic to the specified VLAN.
enable | disable
cos Enables or disables Class of Service override for this
profile with the specified class. Valid values are 0 to 7.