Enterasys Networks 1G58x-09 User Manual
Page 109
General Configuration Command Set
Managing Switch Configuration Files
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3-61
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
•
If append is not specified, the current running configuration will be replaced
with the contents of the configuration file.
•
If an at time or in time are not specified, the configuration will be updated
immediately.
•
If a reason is not specified, none will be applied.
Examples
This example shows how to execute clitxt.txt and update NVRAM to reflect the new configuration:
filename
Specifies the name of the configuration file to execute.
append
(Optional) Executes the configuration as an appendage
(update) to the current configuration.
at time
(Optional) Schedules a configuration update at a specific
time using a 24-hour system (hh:mm).
in time
(Optional) Schedules a configuration update after a specific
time in hours and minutes using a 24-hour system (hh:mm).
reason reason
(Optional) Specifies a reason (text string) for updating the
configuration.
show
Displays information about a scheduled configuration
update.
cancel
Cancels a scheduled configuration update.
Matrix>configure clitxt.txt