Enterasys Networks 1G58x-09 - Manual (Page 250)

SNMP Command Set
Configuring SNMP Access Rights
5-28 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
• If security-model is not specified, access information for all SNMP versions
will be displayed.
• If access level is not specified, information for all levels will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP access information:
Table 5-7 shows a detailed explanation of the command output.
Matrix>show snmp access
Group Name: initial
Security Model: SNMPv3
Security Level: No authentication. No Privacy.
Storage Type: nonvolatile
Row Status: active
Read View Name: internet
Write View Name: internet
Notify View Name: internet
------------------------------
Group Name: initial-restricted
Security Model: - SNMPv3
Security Level: No authentication. No Privacy.
Storage Type: nonvolatile
Row Status: active
Read View Name: internet
Write View Name:
Notify View Name: internet
Table 5-7 show snmp access Output Details
Output What It Displays...
Group Name SNMPv3 group name.
Security Model Security model applied to this group. Valid types
are: SNMPv1, SNMPv2, and SNMPv3.