8 resetting the device, 1 show reset, Resetting the device -87 3.2.8.1 – Enterasys Networks 1G58x-09 User Manual
Page 135: Show reset -87, The device, Section 3.2.8, 8 resetting the device purpose, Commands
General Configuration Command Set
Resetting the Device
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3-87
3.2.8
Resetting the Device
Purpose
To reset the device without losing any user-defined switch and router configuration parameters, or
to clear NVRAM (user-defined) config settings.
Commands
Commands to reset the device are listed below and described in the associated section as shown.
•
show reset (
•
reset (
•
reset at (
•
reset in (
•
clear config (
)
3.2.8.1
show reset
Use this command to display information about scheduled device resets.
show reset
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.