AMETEK BPS Series Programming Manual - Manual (Page 85)

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power
Manual P/N 7003-961 Rev. AA 85
FUNCtion:MODE
Phase selectable
This command determines how the waveform shape is controlled during a triggered output
transient. The choices are:
FIXed The waveform shape is unaffected by a triggered output transient.
LIST The waveform shape is controlled by the waveform shape list when a
triggered transient occurs.
Command Syntax [SOURce:]FUNCtion[:SHAPe]:MODE
Parameters FIXed | STEP | PULSe | LIST
*RST Value FIXed
Examples FUNC:MODE LIST
Query Syntax [SOURce:]FUNCtion[:SHAPe]:MODE?
Returned Parameters
Related Commands FUNC
FUNCtion:CSINe
Phase selectable
This command sets the clipping level when a clipped sine output waveform is selected. The
clipping characteristics can be specified as follows:
• The clipping level is expressed as the percentage of total harmonic distortion in the
output voltage. The range is 0 to 20 percent.
Command Syntax [SOURce:]FUNCtion[:SHAPe]:CSINusoid
Parameters 0 to 20%
*RST Value 0% (no clipping)
Examples FUNC:CSIN 10
Query Syntax [SOURce:]FUNCtion[:SHAPe]:CSINusoid?
Returned Parameters
Related Commands FUNC:MODE