AMETEK BPS Series Programming Manual - Manual (Page 122)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual
122 Manual P/N 7003-961 Rev AA
Command Syntax SYSTem:COMMunicate:LAN:DESCription
Parameters
Example
SYST:COMM:LAN:DESC “EVAL UNIT”
Query Syntax SYST:COMM:LAN:DESC?
Returned Parameters
SYSTem:COMMunicate:LAN:GWADdress
This command will set the LAN Gateway address. The query format returns the Gateway
address set. To query the actual gateway address used by the LAN interface (in case the IP
address is not static but assigned by a DHCP server), the NCON parameter (Network
Connection Setting) must be added to the query. The default value is 0.0.0.0.
Command Syntax SYSTem:COMMunicate:LAN:GWADddress
Parameters ddd.ddd.ddd.ddd
Example SYST:COMM:LAN:GWAD 255.255.255.0
Query Syntax SYST:COMM:LAN:GWAD?
SYST:COMM:LAN:GWAD? NCON
Returned Parameters
SYSTem:COMMunicate:LAN:HOST
This command will set the Host name. The name is limited to 16 characters
Command Syntax SYSTem:COMMunicate:LAN:HOST
Parameters
Example
SYST:COMM:LAN:HOST “ACS”
Query Syntax SYST:COMM:LAN:HOST?
Returned Parameters
SYSTem:COMMunicate:LAN:PASSword
This command will set the user password. The password is used to access to LAN
configuration screen from the Web page. The default password is “admin”. The description
is limited to 8 characters.
Command Syntax SYSTem:COMMunicate:LAN:PASSword
Parameters
Example
SYST:COMM:LAN:PASS “admin”
Query Syntax SYST:COMM:LAN:PASS?
Returned Parameters
SYSTem:COMMunicate:LAN:PORT
This command will set the socket port number. The query format returns the port number
set. The default value is 5025.
Command Syntax SYSTem:COMMunicate:LAN:PORT
Parameters 0- 65535
Example SYST:COMM:LAN:PORT 5025
Query Syntax SYST:COMM:LAN: PORT?
Returned Parameters