Upon unpacking, 3 repacking for relocation, Figure 3-2 – Adept s650H Quattro User Manual
Page 37: Crates with front panel/sides removed
Repacking for Relocation
Adept Quattro s650 Robot User’s Guide, Rev B
37
Figure 3-2. Crates with Front Panel/SIdes Removed
Upon Unpacking
Before signing the carrier’s delivery sheet, compare the actual items received (not just the
packing slip) with your equipment purchase order. Verify that all items are present and
that the shipment is correct and free of visible damage.
• If the items received do not match the packing slip, or are damaged, do not sign
the receipt. Contact Adept as soon as possible (see
).
• If the items received do not match your order, please contact Adept immediately.
Retain all containers and packaging materials. These items may be necessary to settle
claims or, at a later date, to relocate the equipment.
3.3
Repacking for Relocation
If the robot or other equipment needs to be relocated, reverse the steps in the installation
procedures that follow in this chapter. Reuse all original packing containers and materials
and follow all safety notes used for installation. Improper packaging for shipment will
void your warranty.
CAUTION:
The robot must always be shipped in an
upright orientation.