Dell TL2000 - Manual (Page 176)

Table 8-1. Error Codes (continued)
Error Code Description User Action
F3 Drive Hardware Error
The subcode indicates which drive is
affected.
Example:
Subcode 02: drive #2
Contact technical support.
F4 Drive Load Timeout
Drive has run in a timeout while loading
a tape.
The subcode indicates which drive is
affected.
Example:
Subcode 02: drive #2
F5 Drive Unload Timeout
Drive has run in a timeout while
unloading a tape
The subcode indicates which drive is
affected.
Example:
subcode 02: drive #2
Table 8-2. Sub error codes
Error Code Description
Robotics
00 No sub error code
01 Mechanical initialization failure
02 Connection to slave robotic failed
03 Error motor initialization
04 Error during gripper close
05 Error slider home positioning
06 Error elevator home movement
07 Error during sled movement to rotation position
08 Error during rotation initialization, get range failed
09 Error elevator init
0A Error during rotation to far position
8-8 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide