Dell TL2000 - Manual (Page 171)

Table 8-1. Error Codes (continued)
Error Code Description User Action
50 SCSI: cartridge belongs to another
partition
Check application software.
54 SCSI: failure in LME interface
55 SCSI: invalid license key entered
58 Recovered Error: SCSI parity error
Command successful after retries.
59 Recovered Error: Error log overflow
60 Cleaning tape installed Complete the cleaning process and retry the operation.
61 Cleaning failure Cleaning process could
not be performed
Check cleaning tape and exchange if necessary. Retry
operation
62 Cleaning tape expired Exchange cleaning tape
63 Invalid cartridge Drive has rejected the
data tape as invalid
Check cartridge regarding tape and drive technology and
retry operation. After further occurrence exchange data
cartridge.
64 Invalid cleaning cartridge Drive has
rejected the cleaning tape as invalid
Check cleaning cartridge and retry operation. After further
occurrence exchange cleaning tape.
65 Invalid upgrade cartridge Drive has
rejected the upgrade tape as invalid
Retry operation, after further occurrence contact technical
support for new upgrade tape
70 Currently not used
71 Currently not used
72 Currently not used
73 SCSI: overlapped command attempt
Check the application software.
74 SCSI: echo buffer overwritten
80 Bar code reader Error, cannot initialize
BCR
Contact technical support.
81 Bar code reader Error, no response from
BCR
82 EEPROM (Electrically Erasable
Programmable Read-Only Memory )
Error, no response from EEPROM
(located on accessor controller)
83 Accessor controller generic problem
84 Setting of gripper motor parameters
failed
85 Setting of slider motor parameters failed
86 Setting of elevator motor parameters
failed
87 Setting of rotation motor parameters
failed
88 Setting of sled motor parameters failed
Chapter 8. Error Codes 8-3