Dell TL2000 - Manual (Page 127)

After clicking Activate , this page will display if you have entered the feature key
correctly.
Note: Follow the instructions in the Dell PowerVault TL4000 Failover Configuration
Guide to configure your environment for failover.
Configure Library: Encryption
Note: Application Managed Encryption (AME) does not require a key. Library
Managed Encryption requires a license key. The customer should contact
their TSR (technical sales representative) to purchase this feature.
Prerequisites for Application Managed Encryption:
v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height)
Note: Fibre Channel is full height drive only.
v Ultrium 4 Tape Cartridge
v Library firmware level 5.80 or higher
v Drive firmware level 77BE or higher
v Tape backup software application that supports LTO4 encryption
Prerequisites for Library Managed Encryption:
v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height)
Note: Fibre Channel is full height drive only.
v Ultrium 4 Tape Cartridge
v Library firmware level 5.80 or higher
v Drive firmware level 77BE or higher
v Dell Encryption Key Manager application
Setting or Changing a Drive’s Method of Encryption
1. Enter your library’s IP Address in an internet browser address field and press
ENTER.
2. Log in to the Web User Interface. Refer to “Login” on page 2-5.
3. Expand Configure Library in the left navigation pane.
4. Click Encryption .
a77ug1
17
Figure 5-33. The 4U library Configure Library: Path Failover page
a77ug1
18
Figure 5-34. Path Failover license verification page
Chapter 5. Operations 5-41