Dell TL2000 - Manual (Page 172)

Table 8-1. Error Codes (continued)
Error Code Description User Action
89 Gripper blocked
1. If this is the first time the library has been powered ON
or if it has been moved to a new location, ensure that
the shipping lock has been removed. The lock is located
on the top of the library (see “Removing and Storing the
Shipping Lock” on page 4-4).
2. Remove the left and right cartridge magazines (refer to
“Cartridge Magazines” on page 4-30).
3. Look inside the library and remove any obvious
obstruction that may be preventing the accessor from
functioning properly.
4. Cycle library power and retry operation.
v If the error reoccurs, contact technical support.
v If the error does not reoccur, continue with normal
library operation.
8A Slider blocked
8B Elevator blocked
8C Rotation blocked
8D Sled blocked
8-4 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide