Labconco PURICARE Procedure Station Models 34812xx - Manual (Page 50)

Page 50 of 197
The Logic Touchpad
The touchpad of the Logic is shown in Figure 4-4. Take a moment to get familiar with
the buttons, their location and function. Also familiarize yourself with the display located
on the right side wall. The display will report system operation, such as optional inflow
and downflow velocities, timer displays, alarm or error messages, as well as icons that
illuminate when that part of the Purifier is operational (UV light or blower, for example).
Figure 4-4
Blower Button – Starts or stops the cabinet blower.
When the blower is in Smart-Start
TM mode, closing the
sash will turn the blower off. When the sash is raised, the
blower will restart automatically. In Night-Smart
TM mode,
when the sash is closed, the motor will slow to idle to
maintain air cleanliness in the work area. When the sash is
reopened, the blower will resume normal operation.
Pressing this button will override Smart-Start
TM and Night-
Smart TM operation.
Light Button – Turns the fluorescent lamps on or off.
Closing the sash will automatically turn the lights off.
When the lights are in Smart-Start
TM mode, when the sash
is raised, the lights will turn on automatically.
UV Light Button – Turns the UV lamp on or off. When
the UV lamp is in Smart-Start
TM mode, closing the sash will
turn the lights on. When the sash is raised, the lights will
turn off automatically.
Timer Button – Allows you to select either an repeating
interval timer, or an elapsed timer (stopwatch)
Mute/OK Button – Mutes all audible alarms for
approximately 5 minutes, unless it is a system error alarm.
When in the Menu mode, this button is used to select an
option.
Menu Button – This button toggles the display between
the display and menu modes. When in the menu mode,
pressing this button will return you to the previous menu
level.
Select Buttons – Allow you to choose different options in
the menu mode.