Power supply and relay board service operations, Fuse testing & replacement – Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 144
Page 144 of 197
Power Supply and Relay Board Service Operations
The Power Supply and relay boards are considered a single part, Labconco part number.
3842900.
Fuse Testing & Replacement
The Power Supply Board is protected by an integral 5 x 20mm, fuse, rated at 2.5
Amps at 250 volts, as shown in Figure 9-5.
The fuse is tested with a standard continuity meter. Any resistance across the
fuse indicates a defective fuse and should be replaced.
Figure 9-5
Relay Board
(lower green circuit board)
Power Supply Board
(upper tan board)
Power Supply Fuse
This manual is related to the following products:
- PURICARE Procedure Station Models 34810xx PURICARE Procedure Station Models 34802xx PURICARE Procedure Station Models 34800xx Type B2 Biosafety Cabinets Models 34610xx Type B2 Biosafety Cabinets Models 34410xx Type A2 Biosafety Cabinets Models 34609 Type A2 Biosafety Cabinets Models 34509 Type A2 Biosafety Cabinets Models 34409 Type A2 Biosafety Cabinets Models 34309 Type A2 Biosafety Cabinets Models 34608xx Type A2 Biosafety Cabinets Models 34508xx Type A2 Biosafety Cabinets Models 34408xx Type A2 Biosafety Cabinets Models 34308xx Type A2 Biosafety Cabinets Models 34600xx Type A2 Biosafety Cabinets Models 34500xx Type A2 Biosafety Cabinets Models 34400xx Type A2 Biosafety Cabinets Models 34300xx