Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 178
Page 178 of 197
4. Install the replacement brackets that were included with the postfilter
accessory kit.
5. Install the postfilter pan between the exhaust filter brackets. Line up the
holes in the postfilter pan with the screw holes in the brackets.
6. Install the four screws, washers and nuts supplied with the kit as shown,
and tighten them securely to the exhaust filter brackets.
7. Install a new postfilter, making sure the airflow direction arrows point
upward. Reinstall the exhaust filter cover.
This manual is related to the following products:
- PURICARE Procedure Station Models 34810xx PURICARE Procedure Station Models 34802xx PURICARE Procedure Station Models 34800xx Type B2 Biosafety Cabinets Models 34610xx Type B2 Biosafety Cabinets Models 34410xx Type A2 Biosafety Cabinets Models 34609 Type A2 Biosafety Cabinets Models 34509 Type A2 Biosafety Cabinets Models 34409 Type A2 Biosafety Cabinets Models 34309 Type A2 Biosafety Cabinets Models 34608xx Type A2 Biosafety Cabinets Models 34508xx Type A2 Biosafety Cabinets Models 34408xx Type A2 Biosafety Cabinets Models 34308xx Type A2 Biosafety Cabinets Models 34600xx Type A2 Biosafety Cabinets Models 34500xx Type A2 Biosafety Cabinets Models 34400xx Type A2 Biosafety Cabinets Models 34300xx