Labconco PURICARE Procedure Station Models 34812xx - Manual (Page 30)

Page 30 of 197
LOGIC MODEL NUMBERING SYSTEM
Purifiers are assigned their respective model numbers, based on their configuration and
the options they are equipped with. The first five digits define the unit's configuration,
while the last two are assigned based on the unit's options. Thus, a model number of:
34308-01
343- Indicates a 3-foot Logic Purifier
08- Indicates an 8-inch sash opening (00-indicates a 10-inch opening)
0- indicates operating voltage (0-for 115 VAC, 1-for 100 VAC, 2-for 230 VAC)
1- Indicates a UV lamp and service valve(s)
The current Logic Purifier model line is defined as follows:
• 34300 Three foot Type A2, 10-inch sash
• 34308 Three foot Type A2, 8-inch sash
• 34400 Four foot Type A2, 10-inch sash
• 34408 Four foot Type A2, 8-inch sash
• 34500 Five foot Type A2, 10-inch sash
• 34508 Five foot Type A2, 8-inch sash
• 34600 Six foot Type A2, 10-inch sash
• 34608 Six foot Type A2, 8-inch sash
Logic Data Plate
The Logic Data Plate contains much of the information required to certify the unit.
Information on the plate includes nominal inflow and downflow velocity settings, a
description of how to establish the downflow grid and the secondary inflow methodology
are also included on the data plate, as shown below. The plate is located in the upper
left corner of the dress panel.
Figure 1-6